Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Calculate & compare two separate simulations on the same geometry
Posted 2012年6月19日 GMT-4 09:05 Fluid & Heat, Microfluidics, Results & Visualization, Studies & Solvers Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
I have done a laminar flow simulation (including the inertial term), and now would like to do the same simulation (identical geometry, meshing, boundary conditions) with the inertial term neglected.
Then I would like to compare the two solutions by creating the difference (DataSets-Join shoud do that) and plot the result as a 3D-Slice.
How do I go about calculationg two seperate solutions in the same Model?
Thank you.
Then I would like to compare the two solutions by creating the difference (DataSets-Join shoud do that) and plot the result as a 3D-Slice.
How do I go about calculationg two seperate solutions in the same Model?
Thank you.
1 Reply Last Post 2012年6月21日 GMT-4 11:15
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
have you checked the data set join (or is it only in v4.3 ?)
--
Good luck
Ivar
have you checked the data set join (or is it only in v4.3 ?)
--
Good luck
Ivar