Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The Geomechanics Module

Posted 2021年10月14日 GMT-4 03:04 1 Reply

Malgorzata Wojcik, PhD The CHEMKOP Company
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

Do I need the Geomechanics module for modeling the stress, strain, von Mises stress in rock salt? What type of material behavior I need to include in this model? The physics of the case is as follows: An underground cavern is developed in the rock salt deposit and it is used for natural gas storage under variable pressure. Strain and stress distribution is used to evaluate the cavern stability and safety. Rock salt is a creeping medium.

Thank you so much, Malgorzata

1 Reply Last Post 2021年10月14日 GMT-4 04:53
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年10月14日 GMT-4 04:53

To find built-in models for creep, you need either the Geomechanics Module or the Nonlinear Structural Materials Module.

Alternatively, you can formulate the time-dependent creep equations yourself, using one of the mathematics interfaces (probably Domain ODEs and DAEs), and then inject the creep strains into Solid Mechanics as an External Strain. In this case the Structural Mechanics Module will suffice. This, of course, requires more work and a higher level of knowledge about the usage of the software.

-------------------
Henrik Sönnerlind
COMSOL
To find built-in models for creep, you need either the *Geomechanics Module* or the *Nonlinear Structural Materials Module*. Alternatively, you can formulate the time-dependent creep equations yourself, using one of the mathematics interfaces (probably *Domain ODEs and DAEs*), and then inject the creep strains into *Solid Mechanics* as an *External Strain*. In this case the *Structural Mechanics Module* will suffice. This, of course, requires more work and a higher level of knowledge about the usage of the software.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content