Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

modelling rotating machinary

Please login with a confirmed email address before reporting spam

Hi
I'm trying to model a turbo machine with a rotating machinery turbulent flow. There was a problem with compiling equations which its gone by decreasing the the time step (to 0.001s) however I don't know about the the second error which it's given as:

Failed to find consistent initial values.
Segregated group 1

Matrix has zero on diagonal.
Last time step is not converged.

anyone could help me to solve this problem?
meanwhile I'm attaching the geometry of my turbo machine.


2 Replies Last Post 2012年7月6日 GMT-4 13:15

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月6日 GMT-4 10:40
please help me with my problem how could I fix this error
please help me with my problem how could I fix this error

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月6日 GMT-4 13:15
Hi

one cannot really tell like that, but it will be a heavy model, have you considered to reduce it to a quadrant and use the symmetry, fluidics need very fine mesh, that could be too your issue just now

--
Good luck
Ivar
Hi one cannot really tell like that, but it will be a heavy model, have you considered to reduce it to a quadrant and use the symmetry, fluidics need very fine mesh, that could be too your issue just now -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.