Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Measure the mass of a domain

Posted 2022年1月7日 GMT-5 09:22 General, COMSOL Server, Materials Version 5.6 2 Replies

Adrian POK
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good day May i ask is there any method to measured the mass of a domain? For example, i build a sphere in COMSOL and and need to know the mass of the sphere.

Thanks in advance

2 Replies Last Post 2022年1月10日 GMT-5 03:49
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022年1月7日 GMT-5 09:25

Define a domain integration and integrate the density of the domain. If you integrate 1 you get the volume.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Define a domain integration and integrate the density of the domain. If you integrate 1 you get the volume.
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022年1月10日 GMT-5 03:49
Updated: 3 years ago 2022年1月11日 GMT-5 10:46

Hi,

Also, check out the Mass Properties node under Component>Definitions, where you can define variables for the mass, volume, center of mass, and moments of inertia.

Best regards,

Magnus

Hi, Also, check out the **Mass Properties** node under **Component>Definitions**, where you can define variables for the mass, volume, center of mass, and moments of inertia. Best regards, Magnus

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content