Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Prescribed displacement in Cylindrical coord system
Posted 2012年7月11日 GMT-4 15:55 Structural Mechanics Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
Thanks for reading my posting.
I am trying to circumferentially stretch a piece of flexible cylinder (with central angle of 75 degrees) and make it a half cylinder (central angle of 180 degrees). To get better idea about what my problem is please see the attached picture. The picture is from the solution that I got from Cartesian coord. Sys.
After I solved the problem using Cartesian coord. sys, I decided to solve it using cylindrical coordinate system, where in the boundary conditions I need to specify two DISPLACEMENTS: one in r direction and the other in phi (tangential) direction. Unfortunately, the program is not asking for entering the change in angle phi, but is asking about change in length (displacement) in phi direction.
My question is that whether this displacement is defined in COMSOL as d(r*phi)= r*d(phi)+phi*dr
Thank you.
Jessica W
Hello Jessica
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.