Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Print Material data for a report

Please login with a confirmed email address before reporting spam

Hello everyone,

I want to make a report about a simulation.

Is it possible to get the material data printed somehow? To the clipboard as a table would be great.
I defined three different materials with functions and I just don't want to type all the data again.
If possible, also the functions should be included.

Regards
Stefan

2 Replies Last Post 2012年7月18日 GMT-4 11:26
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月18日 GMT-4 03:18
Hi

use the Reports section and dump a detailed report into a html or even MsWord doc file in v4.3 then you can extract from there

Before, I made often a "clip-it" screen dump of my GUI window, and plottet by hand a few graphs of my material properties.

I agree today we spend still too much time clicking in the results and reports part to get the relevant data out and to a presentation or a report, compared to the time we need to set-up, solve & validate interesting and complex problems

--
Good luck
Ivar
Hi use the Reports section and dump a detailed report into a html or even MsWord doc file in v4.3 then you can extract from there Before, I made often a "clip-it" screen dump of my GUI window, and plottet by hand a few graphs of my material properties. I agree today we spend still too much time clicking in the results and reports part to get the relevant data out and to a presentation or a report, compared to the time we need to set-up, solve & validate interesting and complex problems -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月18日 GMT-4 11:26
Hi,

thanks a lot.

I'll make it as suggested. The effort is still okay.

Stefan
Hi, thanks a lot. I'll make it as suggested. The effort is still okay. Stefan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.