Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Creating Input Shear Flow on Laminar Flow Study
Posted 2022年3月6日 GMT-5 16:07 Computational Fluid Dynamics (CFD) Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
I have a couette situation where both walls are moving in the opposite direction and i would like to implement a shear flow between the walls using Input with Boundary condition Velocity. In the section Normal inflow velocity i would like to put in the function for shear flow V/h*z for U0 but Comsol shows me a failure with the remark that the unit is m but has to be m/s but from my understanding with my function it must be m/s. The solver shows a problem during calculation with a wrong unit.
How can I solve this probleme?
Please login with a confirmed email address before reporting spam
Hi Niklas,
- If I understand correctly, you intend for the flow at the two boundaries in question to be tangential to the boundaries. If so, then the "Normal inflow velocity" option is not the appropriate one for your model. Here "normal" means perpendicular, not ordinary. Use the more general "Velocity field" option instead (at least that's what it is called in v6.0; I do not have 5.1 installed).
- Double-check your units. The odds are not in your favor.
- "Couette" in "Couette flow" refers to the Maurice Couette, not to a duvet. Let's honor him with a capital C.
Best,
Jeff
-------------------Jeff Hiller