Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
limitations of number of data in table or result.
Posted 2012年7月30日 GMT-4 11:18 RF & Microwave Engineering Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
I am using the transient solver in RF modual, and recording the time-varying electric field.
For example, I have the following setteings:
Comsol is set to record the electric field at a given point every 1fs starting from 0 to 20,000fs.
Then, after simulation, I would suppose to have 20,000 data points.
However, it seems that there is a limitation on the maximun number of stored data numbers, only the latest 10,000 data are recored, and all the values before that are erased. Under this situation, when I plot electric field E versus time t, I only get 10,000 points instead of 20,000.
Can anyone help me to figure this out, since I need a long data sequence to do further data analyzing. I really appreciate for your help. Thanks.
I am using the transient solver in RF modual, and recording the time-varying electric field.
For example, I have the following setteings:
Comsol is set to record the electric field at a given point every 1fs starting from 0 to 20,000fs.
Then, after simulation, I would suppose to have 20,000 data points.
However, it seems that there is a limitation on the maximun number of stored data numbers, only the latest 10,000 data are recored, and all the values before that are erased. Under this situation, when I plot electric field E versus time t, I only get 10,000 points instead of 20,000.
Can anyone help me to figure this out, since I need a long data sequence to do further data analyzing. I really appreciate for your help. Thanks.
2 Replies Last Post 2012年7月31日 GMT-4 11:20
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I usually use Results-Export-Data. It easily gives me 1,000,000 points
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Alexander,
It really helps, thank you.
It really helps, thank you.