Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Using ready COMSOL file with different geometry
Posted 2022年11月6日 GMT-5 10:55 General, Microfluidics, Physics Interfaces 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I just want to ask if it is possible to use ready COMSOL file but change the geometry to see the simulation.
I used ready COMSOL file but I have changed the geometry, but when I reach to transport of duluted species and laminar flow physics and I want to select the inlets and outlets it wont allow me to select them. Also for the boundries it was mentiond but it says not applicable next to them.
Attachments:
Please login with a confirmed email address before reporting spam
In general, yes, you should be able to change the geometry and re-use an existing model.
But details matter. My guess (and it can only be a guess if you don't post your model, hint hint) is that some selections were inappropriate.
The better way to approach this is to rebuild yourself a similar model that is fully documented as an example on the Comsol website.