Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modeling of hydrodynamic cavitation
Posted 2022年11月15日 GMT-5 05:23 Computational Fluid Dynamics (CFD), Modeling Workflow, Physics Interfaces Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
Hi!
I try to simulate hydrodynamic cavitation in Comsol. The water flows through a constricting device. First, the diameter is 40 mm, then it decreases to 1 mm, then it increases to 40 mm again. The pressure decreases in a narrow section. Therefore, cavitation bubbles are formed.
I used the next interfaces: heat transfer in fluid, phase transport, turbulent flow. But I don't get the correct results. I mean the volume fraction of fluid is the 1, and the volume fraction for dispersed phase (air's bubbles) is 0.
Can someone help me with it? *Sorry for my English.
Hello Виктория Peretiiatko
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.