Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
integer function
Posted 2012年9月18日 GMT-4 14:42 Materials Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hello All,
Does anyone know if it is possible to use the integer function in comsol? I have found the "round" and "ceil" and "floor" but none of them are giving me the same results as an integer function would.. I thought I would be able to use int(x) but comsol uses that for interpolation! Any ideas?
Thank you.
Kelley
Does anyone know if it is possible to use the integer function in comsol? I have found the "round" and "ceil" and "floor" but none of them are giving me the same results as an integer function would.. I thought I would be able to use int(x) but comsol uses that for interpolation! Any ideas?
Thank you.
Kelley
1 Reply Last Post 2012年9月18日 GMT-4 15:56
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if nothing else work, try:
my_int() = sign(x)*floor(abs(x))
and probably
my_other_int = x - mod(x,1)
should also work
But indeed I see no "int" at p 143 of the user guide (v4.3)
--
Good luck
Ivar
if nothing else work, try:
my_int() = sign(x)*floor(abs(x))
and probably
my_other_int = x - mod(x,1)
should also work
But indeed I see no "int" at p 143 of the user guide (v4.3)
--
Good luck
Ivar