Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

technical problem

Posted 2012年9月23日 GMT-4 19:19 Version 4.3 1 Reply

Abderrahman Eddazi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good Morning;
The density of the air depends on the temperature and pressure.
Can you give me the analytical expression of the density of the air used by default in COMSOL.?
1 Reply Last Post 2012年9月23日 GMT-4 21:33
Jim Freels mechanical side of nuclear engineering, multiphysics analysis, COMSOL specialist
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年9月23日 GMT-4 21:33
You can look this up yourself by adding "air" from the material library to the model, then investigate the expressions used to evaluate the property. You can also add your own materials to the material library if you are not satisfied with what COMSOL provides for you. There is also a more detailed set of material properties in the material property module.
You can look this up yourself by adding "air" from the material library to the model, then investigate the expressions used to evaluate the property. You can also add your own materials to the material library if you are not satisfied with what COMSOL provides for you. There is also a more detailed set of material properties in the material property module.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content