Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mesh importing
Posted 2012年10月6日 GMT-4 15:56 Mesh Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
Is't possible to import 2D mesh in dxf file format in to Comsol?
How can I import such mesh?
Regards
Roi
Is't possible to import 2D mesh in dxf file format in to Comsol?
How can I import such mesh?
Regards
Roi
1 Reply Last Post 2012年10月9日 GMT-4 12:25
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
import of 2D dxf-meshes is not supported. You can import a dxf-file as a geometry though. You can then let COMSOL create a mesh within this geometry.
You find a list of supported import/export formats at:
www.comsol.de/products/formats/
Hope that helps!
Best regards,
Erik
--
*********************
Senior Technical Sales Engineer
COMSOL Multiphysics GmbH
Berliner Str. 4
37073 Göttingen
Deutschland
import of 2D dxf-meshes is not supported. You can import a dxf-file as a geometry though. You can then let COMSOL create a mesh within this geometry.
You find a list of supported import/export formats at:
www.comsol.de/products/formats/
Hope that helps!
Best regards,
Erik
--
*********************
Senior Technical Sales Engineer
COMSOL Multiphysics GmbH
Berliner Str. 4
37073 Göttingen
Deutschland