Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Diffusion problem
Posted 2012年11月5日 GMT-5 08:05 Chemical Reaction Engineering Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
Hi friends
I want to model a fluid (Air) from one side and gases (3 species i.e xenon,radon,helium) to diffuse from the bottom.
the problem is when i select air for the domain for fluid flow and then want to select these gases from Material selection list then Air is overridden by new material. what should i do for selection of material for diffusion ?
is it not need to select material from the material list for diffusion ?
I want to model a fluid (Air) from one side and gases (3 species i.e xenon,radon,helium) to diffuse from the bottom.
the problem is when i select air for the domain for fluid flow and then want to select these gases from Material selection list then Air is overridden by new material. what should i do for selection of material for diffusion ?
is it not need to select material from the material list for diffusion ?
1 Reply Last Post 2012年11月7日 GMT-5 10:57
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
You have the gaseous mixture, so you need to define all the physical properties for multicomponent not for the individual component. Under material selection, Comsol has defined physical properties only for pure component not for the multicomponent.
good luck
Mayur
You have the gaseous mixture, so you need to define all the physical properties for multicomponent not for the individual component. Under material selection, Comsol has defined physical properties only for pure component not for the multicomponent.
good luck
Mayur