Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to add both rotation and Translation simultaneously for a geometry.
Posted 2023年10月10日 GMT-4 11:23 Computational Fluid Dynamics (CFD), Modeling Tools & Definitions 1 Reply
Please login with a confirmed email address before reporting spam
Hello，
Recently， I creat a geometry with helix shape. I need helix rotate with its central axis, so the rotation movement will be transformed into translation（forward） due to helical shape. Now with the Moving Mesh Interfaces， I can only realize the helix rotate with its central axis，but it not translation， only stay the original place and rotation.
In addition, I also try the prescribed deformation, with dx = cos(2pit1[Hz]) dy = sin(2pit1[Hz]) dz = t*1[m/s] But, this a whole tranlation without rotation with its central axis.
So, could u please give me some suggestions about how to apply both rotation and translation for a helix shape, and with its rotation with its axis， it can realize translate forward.
Thank you for your help and looking forward to your reply.
Best regards Hou
Please login with a confirmed email address before reporting spam
Hou,
I think the expressions for the prescribed deformation are not complete. Shouldn't the x and y movement comprise the radius (e.g. sqrt(x^2 + y^2) and the z movement should comprise the pitch of the helix?
Cheers Edgar
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com