Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electrostatically actuated cantilever beam
Posted 2023年10月30日 GMT-4 08:22 3 Replies
Please login with a confirmed email address before reporting spam
I am conducting electrostatic pull in voltage study on cantilever beam, I am getting this error "Failed to find a solution for the initial parameter. Maximum number of Newton iterations reached. Returned solution is not converged. Not all parameter steps returned." in stationary solver 1. I have tried reducing Mesh size but it is not working.
Please login with a confirmed email address before reporting spam
Hello Meet,
It's hard to say without seeing your mph file, but if I was to venture a guess, it would be that the first voltage applied is too large. Try ramping up the voltage more progressively. If that's not the issue, consider uploading your mph file.
Best,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
I am doing pull in voltage study using stationary study using auxiliary sweep for Zset. in stationary solver i have Fully coupled linear solver as Direct, that is where I am getting the error "Failed to find a solution for the initial parameter. Maximum number of Newton iterations reached. Returned solution is not converged. Not all parameter steps returned. "
Please login with a confirmed email address before reporting spam
Can you please upload your mph file?
Jeff
-------------------Jeff Hiller