Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to use time-dependent explicit solver for highly nonlinear dynamic problems?

Posted 2024年1月21日 GMT-5 21:31 Studies & Solvers, Structural Mechanics, Modeling Workflow, Structural Dynamics Version 6.1 2 Replies

HC L solid mechanics
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I wonder how to use time-dependent explicit solver in Comsol for highly nonlinear dynamic problems.

I tried by modeling the compression of two bars who are in adhesive contact with decohesion law specified, but got an error before reaching any result:

  • Feature: Time-Dependent Solver 1 (sol1/t1) Explicit time stepping requires linear time-independent constraints.

I am aware that another thread in this forum has discussed this error over a decade ago. And @Ivar thought this error meant that the model was too nonlinear. I was wondering if someone could shed lights on this.

Anyway, my simplified model is set as follows.

The Solid Mechanics module in 2D domain is employed. A double bar, consisting of two individual bars in adhesive contact with decohesion law specified, is fixed at the left end, while its right end is prescribed to a ramped time-dependent displacement -rm1(t).

**The time-dependent sovler is adopted, and the 'solver type' in 'time stepping' is specified as 'explicit'.

Best, HCL

The two pictures are attached below, in case they are not properly shown above.

2 Replies Last Post 2024年3月21日 GMT-4 13:19
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 months ago 2024年1月23日 GMT-5 05:15

We do not promote the use of the time explicit solver for general structural mechanics applications. The number of cases for which it is applicable is small. One of the limitations of that solver is the one that you have found. As the error message shows, you cannot have time-dependent constraints.

There are several other limitations.

-------------------
Henrik Sönnerlind
COMSOL
We do not promote the use of the time explicit solver for general structural mechanics applications. The number of cases for which it is applicable is small. One of the limitations of that solver is the one that you have found. As the error message shows, you cannot have time-dependent constraints. There are several other limitations.
Pierre Lafortune
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 months ago 2024年3月21日 GMT-4 13:19

Hi,

Do any of the solution proposed in Knowledge Base 1244 and 1245 could be a work around to simulate explicit dynamic with an explicit time scheme?

https://www.comsol.com/support/knowledgebase/1245 https://www.comsol.com/support/knowledgebase/1244

Thanks Pierre

Hi, Do any of the solution proposed in Knowledge Base 1244 and 1245 could be a work around to simulate explicit dynamic with an explicit time scheme? https://www.comsol.com/support/knowledgebase/1245 https://www.comsol.com/support/knowledgebase/1244 Thanks Pierre

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content