Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Why does my Wavelenght Reflectiongraph not show the expectef correct wavelenghts?
Posted 2024年3月9日 GMT-5 07:08 Version 6.1 0 Replies
Please login with a confirmed email address before reporting spam
Currently, I am constructing a nanostructure of the butterfly (Morpho Didus) to demonstrate that the butterfly's blue color is solely a result of structural reflection of light. To achieve this, I have constructed the nanostructure, formed periodic boundaries and PMS (presumably a simulation technique), and specified a port as well as the surrounding material (air). My goal is to simulate simple light rays on the nanostructure and ultimately plot a reflection graph, illustrating that the wavelengths of the blue color are predominantly reflected.
I aim to achieve a reflection graph similar to Figure 2 in the following paper, which served as the basis for my simulation:see picture below. I am striving for a reflection graph akin to the electric field in Figure 2 or as shown here: see picture below.
Unfortunately, my current reflection graphs do not make much sense. Can anyone pinpoint where exactly my problem lies? Below, you can find my file, and I am working in Study 3. Thank you very much!
Hello Sara Al
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.