Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
heat transfer time transient analysis results are not smooth.
Posted 2024年4月23日 GMT-4 21:52 Heat Transfer 0 Replies
Please login with a confirmed email address before reporting spam
hello.
I am using COMSOL to perform a time dependent analysis and I am facing a situation where the resulting values over time do not converge (smooth continuous values).
The analysis is to calculate the temperature through Joule heating in a simple structure and I need to get a continuous and smooth value with respect to time. Even with a very small time interval, a few microseconds, the calculation shows a discontinuous change in slope at certain points as follows.
Is there any way to prevent this from happening with the time dependent solver option?
Thanks.
i uploaded (mash-deleted) model file. and you may check the graph image of transient temperature image from : ,,,
https://drive.google.com/file/d/1-1vwWjPE7z24-BxKagzqldwba9j11e3r/view?usp=sharing
,,,,
https://drive.google.com/file/d/1IhpdtN4fqCT-1m8jhsnLi8Z9ysAX_iRD/view?usp=sharing
Attachments:
Hello Wonbin Song
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.