Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Planar spiral inductors

Posted 2024年5月17日 GMT-4 07:05 Results & Visualization, Studies & Solvers, Physics Interfaces Version 6.0 3 Replies

Lekshmi V
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, Im building a planar coil for simulation of inductance. The model consists of many square coils. When im building it, I am getting an error " Numeric coil Coil 1 (coil1) not solved for. Solve it in a Coil Geometry Analysis step. "

Please help me to rectify the error.

3 Replies Last Post 2024年5月20日 GMT-4 14:36
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年5月18日 GMT-4 18:18

Almost invariably that message means that there is no coil geometry analysis step and there needs to be one.

If that's not it post the model.

Almost invariably that message means that there is no coil geometry analysis step and there needs to be one. If that's not it post the model.
Lekshmi V
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年5月20日 GMT-4 03:02

Thank you for the valuable suggestion. I have added the coil geomatry analysis step. But the same error appeared. I have attached the file here. please help me to find the coil resistance and inductance.

Thank you.

Thank you for the valuable suggestion. I have added the coil geomatry analysis step. But the same error appeared. I have attached the file here. please help me to find the coil resistance and inductance. Thank you.
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年5月20日 GMT-4 14:36

I have attached the file here. please help me to find the coil resistance and inductance.

No you haven't. Read the instructions for reducing the model size (if necessary) and then attach.

>I have attached the file here. please help me to find the coil resistance and inductance. No you haven't. Read the instructions for reducing the model size (if necessary) and then attach.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content