Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Phase calculation related error due to incorrect boundary conditions?

Posted 2013年1月23日 GMT-5 21:50 Version 4.2, Version 4.2a 1 Reply

Arvinder Chadha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to simulate a metal insulator metal fishnet structure which in infinite in the yz plane and the TE polarized wave propagates in the z direction. I have applied PEC on the planes (xy planes) perpendicular to the electric field (Ez) and perfect magnetic conductor (PMC) on the planes perpendicular (xz planes) to magnetic field (Hy) . I then calculate the transmission and reflection away from the structure as shown in the attached image.
I am able to get the correct, transmission T= |t|^2 and reflection R= |r|^2, however, my extracted phase for the transmission (t) and reflection (r) are incorrect.

I tried the following

1. I used port boundary condition to excite and terminate the wave and PEC and PMC as described above to ensure the infinite periodicity in the yz plane. Why is the phase extracted from the S- parameter is not correct ?

2. I tried using scattering boundary to excite and terminate the wave with PEC and PMC as described. In this case, I could correct T but incorrect phase for the transmission. Reflection |R| was greater than 1, which is incorrect.

Can anyone tell me the correct boundary conditions and the means of exciting the wave?
Any help will be appreciated.
Thank you.

Attachments:

1 Reply Last Post 2013年8月10日 GMT-4 00:36
COMSOL Moderator

Hello Arvinder Chadha

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Xiangeng Meng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年8月10日 GMT-4 00:36
Hello Arvinder,

Have you solved this problem? I am now confused with this and wish to have your suggestions if possible. Thank you.

Xiangeng
Hello Arvinder, Have you solved this problem? I am now confused with this and wish to have your suggestions if possible. Thank you. Xiangeng

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content