Can the "base excitation" module be controlled to achieve the specified displacement in transient analysis?

Please login with a confirmed email address before reporting spam

Dear Forum:

Specifically, I used a two-dimensional symmetrical fluid structure coupling module. Due to the strong nonlinearity of the structure, I attempted to use resonant transient analysis for multiple periods.

I derived the sine displacement function twice from t and used it as the acceleration of the fixed direction base vibration. However, the calculated displacement of the base, expressed as solid.u_maseZ, shows a curve of increasing sine function plus linear function.

After searching, the help documentation for the "base excitation" module shows that its acceleration, velocity, and displacement are all relative to a fixed coordinate system. How to make the base displacement become a sine curve with only acceleration input? What is the relationship between the incentive application of "base excitation" and fixed boundary conditions?


1 Reply Last Post 2024年9月3日 GMT-4 08:19
Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 4 months ago 2024年9月3日 GMT-4 08:19

Maybe there is some inspiration to find in the description of frames in comsol https://doc.comsol.com/5.5/doc/com.comsol.help.comsol/comsol_ref_deformedmeshes.25.05.html

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Maybe there is some inspiration to find in the description of frames in comsol https://doc.comsol.com/5.5/doc/com.comsol.help.comsol/comsol_ref_deformedmeshes.25.05.html

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.