Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Transient Heat Transfer
Posted 2013年2月14日 GMT-5 01:28 Heat Transfer & Phase Change, Studies & Solvers 2 Replies
Please login with a confirmed email address before reporting spam
Hi everyone,
I am having difficulties solving a transient heat transfer problem, but the problem can be solved in stationary. I have attached the file. I am working on an analysis of hot pipes embedded in soil.
I am looking forward to hearing any feedbacks from any one of you.
Thanking you in advance.
I am having difficulties solving a transient heat transfer problem, but the problem can be solved in stationary. I have attached the file. I am working on an analysis of hot pipes embedded in soil.
I am looking forward to hearing any feedbacks from any one of you.
Thanking you in advance.
Attachments:
2 Replies Last Post 2013年2月14日 GMT-5 11:01
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
Your model needs initial solution to solve transient situation. Select under "study1 => solver1 => dependent variables => initial values of variables solver for" solution where to start.
Best regards
Tero Hietanen
Your model needs initial solution to solve transient situation. Select under "study1 => solver1 => dependent variables => initial values of variables solver for" solution where to start.
Best regards
Tero Hietanen
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Gary,
Although you have a Time Dependent study step, the solver sequence contains a Stationary solver. I'm assuming that the solver sequence was generated with a Stationary study step, and then the Stationary study step was subsequently replaced by a Time Dependent study step. Whenever the type or number of study steps is altered in a study, delete the current solver sequence by right-clicking on Solver Configurations and selecting "Delete Solvers", and then generate a new solver sequence.
--
Luke Gritter
AltaSim Technologies
Although you have a Time Dependent study step, the solver sequence contains a Stationary solver. I'm assuming that the solver sequence was generated with a Stationary study step, and then the Stationary study step was subsequently replaced by a Time Dependent study step. Whenever the type or number of study steps is altered in a study, delete the current solver sequence by right-clicking on Solver Configurations and selecting "Delete Solvers", and then generate a new solver sequence.
--
Luke Gritter
AltaSim Technologies