Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

About creation of struturegeomerty

Posted 2013年2月21日 GMT-5 01:24 Low-Frequency Electromagnetics, MEMS & Nanotechnology, RF & Microwave Engineering, MEMS & Piezoelectric Devices, Geometry, Materials Version 4.0a, Version 4.1, Version 4.2 5 Replies

Umesh Yadav.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi...!
I am a student of University of Pune,working on Rf MEMS Switch. I can't get how to create a structural geometry of cantilever beam in Com sol multiphysics.
So please help me to create a geometry.

--
uhyadav
5 Replies Last Post 2013年4月16日 GMT-4 05:58
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月21日 GMT-5 01:54
Hi

if you are stating with COMSOL, I can only recommend to start in 2D, then later move to 3D once your model is running, particularly when mixing several physics. For a cantilever you draw it simply with a rectangle (I suggest to split in two by the middle with a geometry layer setting at half the height to force 2 mes elements per thickness, minimum), then fix one end and run i.e. an eigenfrequency study

--
Good luck
Ivar
Hi if you are stating with COMSOL, I can only recommend to start in 2D, then later move to 3D once your model is running, particularly when mixing several physics. For a cantilever you draw it simply with a rectangle (I suggest to split in two by the middle with a geometry layer setting at half the height to force 2 mes elements per thickness, minimum), then fix one end and run i.e. an eigenfrequency study -- Good luck Ivar
Umesh Yadav.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月27日 GMT-5 00:02

Thank you very much for your valuable help.
--
uhyadav
Thank you very much for your valuable help. -- uhyadav
Umesh Yadav.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月9日 GMT-4 02:56
I have problem with how to analyses the various physics for RF MEMS switch.

--
uhyadav
I have problem with how to analyses the various physics for RF MEMS switch. -- uhyadav
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月9日 GMT-4 14:24
Hi

you need to explain a bit more for us out here to understand, have you looked at the different webinars videos on the main COMSOL site ? such as

www.comsol.eu/video/

--
Good luck
Ivar
Hi you need to explain a bit more for us out here to understand, have you looked at the different webinars videos on the main COMSOL site ? such as http://www.comsol.eu/video/ -- Good luck Ivar
Umesh Yadav.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月16日 GMT-4 05:58

This my .mpd file using comsol4.1,please help me for adding physics for simulation of this geometry. For this use electrostatics as a physics.
--
uhyadav
This my .mpd file using comsol4.1,please help me for adding physics for simulation of this geometry. For this use electrostatics as a physics. -- uhyadav

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content