Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
modeling heat transfer/heat loss of solenoid
Posted 2013年2月27日 GMT-5 15:53 Low-Frequency Electromagnetics, Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
working on a magnetic bearing project, and would like to find change in temperature a chosen distance outside solenoid due to current flow. also would like to find magnetic field and energy lost to heating.
have been working to use "multi-turn coil domain" for solenoid and joule heating for heating part. haven't convinced myself that these are correct/most efficient physics to use for the purpose
any advice or suggestions would be greatly appreciated!
Reilly
Please login with a confirmed email address before reporting spam
They should work, but the trick is to ensure that the variable T for temperature is understood correctly (probably via the material properties) and that the heat flux from EC gets into linked correctly a s a body source into the HT physics
--
Good luck
Ivar