Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
solver settings
Posted 2013年3月7日 GMT-5 23:53 Studies & Solvers, Structural Mechanics Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I'm using two physics piezoelectric and moving mesh. I want to change the thickness of the PZT layer using moving mesh and want to calculate the voltage value for each thickness. how to do it in comsol 4.2a. I can do this in comsol 3.5a. Moving mesh is solved using stationary solver and PZT is solved using frequency solver. I used parametric segregated solver in 3.5a to compute the above said operations.
I'm using two physics piezoelectric and moving mesh. I want to change the thickness of the PZT layer using moving mesh and want to calculate the voltage value for each thickness. how to do it in comsol 4.2a. I can do this in comsol 3.5a. Moving mesh is solved using stationary solver and PZT is solved using frequency solver. I used parametric segregated solver in 3.5a to compute the above said operations.
1 Reply Last Post 2013年3月8日 GMT-5 02:52
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I would suggest to change the thickness of the domain via a parameter and a geometrical parametric sweep, else its rather the DG you should use , but in addition to ALE it becomes tricky
--
Good luck
Ivar
I would suggest to change the thickness of the domain via a parameter and a geometrical parametric sweep, else its rather the DG you should use , but in addition to ALE it becomes tricky
--
Good luck
Ivar