Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error about 'Failed to find consistent initial values. Last time step is not converged'
Posted 2013年3月11日 GMT-4 12:00 Fluid & Heat, Chemical Reaction Engineering Version 4.0a 0 Replies
Please login with a confirmed email address before reporting spam
I am a new user of COMSOL. I've set up my reactor geometry model and successfully applied the turbulent flow (stationary condition) in my reactor model. However, when I try to simulate my reactor dynamic behavior under time dependent condition of turbulent flow, there is always a problem which says 'Failed to find consistent initial values. Last time step is not converged.'
Besides, when I try to add a turbulent bubbly flow (two phases flow), even under stationary condition, there is a problem about 'the matrix has zero on diagonal'. I don't know how to solve these problems and I will feel very thankful if I can get some advises. Many thanks!
Best wishes,
Dd.
Hello Dd. Zhang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.