Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

conversion of 3D geometery model from comsol to .stl or .stp or.igs

Please login with a confirmed email address before reporting spam

Dear Sir,

I have designed 3d capacitive single axis accelerometer. So can i convert this 3d geometry model to any of the formats such as, .stl or .stp or.igs. Please suggest me.

1 Reply Last Post 2013年3月13日 GMT-4 06:55
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月13日 GMT-4 06:55
Hi

If it is a COMSOL geometry I do not believe you can export it in other than COMSOL geom format. There are licence issues around echange of propretarian formats, and stl is not a true 3D format, iges not really either

If you have imported the geometry from a CAD, I belive you can reexport it, but I have never tried.

But I use the COMSOL geom for my simple modls, and to complete received CAD models, never the other way ;)

--
Good luck
Ivar
Hi If it is a COMSOL geometry I do not believe you can export it in other than COMSOL geom format. There are licence issues around echange of propretarian formats, and stl is not a true 3D format, iges not really either If you have imported the geometry from a CAD, I belive you can reexport it, but I have never tried. But I use the COMSOL geom for my simple modls, and to complete received CAD models, never the other way ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.