Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem with air as a fluid ;-)
Posted 2013年3月15日 GMT-4 06:14 Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Dear sir,
While solving my model, I am getting an error that the "Last time step is not converged" if the air is taken as a fluid whereas it is showing the results when air is taken as a solid.
What should I do to get the solution with air as a fluid??
While solving my model, I am getting an error that the "Last time step is not converged" if the air is taken as a fluid whereas it is showing the results when air is taken as a solid.
What should I do to get the solution with air as a fluid??
1 Reply Last Post 2013年3月15日 GMT-4 07:02
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you need to explain a bit more what you are doing, which dimension , which physics, something about the model
A fluid and a solid are quite different in their properties and the way to approach simulations, even if COMSOL is doing a lot to unify everything.
fluids needs ideally the CFD modules or with the MEMS, but certain simplification to the model can be done fully in "solid" too
--
Good luck
Ivar
you need to explain a bit more what you are doing, which dimension , which physics, something about the model
A fluid and a solid are quite different in their properties and the way to approach simulations, even if COMSOL is doing a lot to unify everything.
fluids needs ideally the CFD modules or with the MEMS, but certain simplification to the model can be done fully in "solid" too
--
Good luck
Ivar