Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Difference Between Fixed Constraint and Rigid Connector .

Posted 2013年3月21日 GMT-4 07:40 Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 4.0, Version 4.0a, Version 4.1, Version 4.2a, Version 4.3, Version 4.3a 2 Replies

Victor Soares
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Whats the difference between fixed constraint and rigid connector ??

I'm trying to simulate a Frequency Response Analysis on a Aluminum Box that has a 'shaker' on it's lid and the lid is fixed to an arm. So I'm using a rigid connector, because if Fixed Constrained it won't work.

So I'd like to understand better those two concepts.
2 Replies Last Post 2013年3月21日 GMT-4 10:56
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月21日 GMT-4 09:15
Hi
There are many issues here: some I can easily explain, to get a full view you need to dig into the formulas (equations)

Fixed means that u-0, v-0 w-0 is respcted i.e NO motion w.r.t. absolute reference.
A RC (rigid connector) applied to a (or more) boundary(ies) will make the boundary rigid (no relative deformation possible) only global displacements with respect to a CoR (centre of Rotation) and you can impose restricted position/motion (with respect to a global fixed reference) of this centre of rotation. An RC also generates a series of lumped variables such as 3 angles global displacements (w.r.t. CoR) if applicale, you can apply forces or moments to an RC.

Read through in detail the different BC, these are many and can be tailored to astonishing (and unexpeced) uses often via equations ;)

--
Good luck
Ivar
Hi There are many issues here: some I can easily explain, to get a full view you need to dig into the formulas (equations) Fixed means that u-0, v-0 w-0 is respcted i.e NO motion w.r.t. absolute reference. A RC (rigid connector) applied to a (or more) boundary(ies) will make the boundary rigid (no relative deformation possible) only global displacements with respect to a CoR (centre of Rotation) and you can impose restricted position/motion (with respect to a global fixed reference) of this centre of rotation. An RC also generates a series of lumped variables such as 3 angles global displacements (w.r.t. CoR) if applicale, you can apply forces or moments to an RC. Read through in detail the different BC, these are many and can be tailored to astonishing (and unexpeced) uses often via equations ;) -- Good luck Ivar
Victor Soares
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月21日 GMT-4 10:56
Thank you very much .



I have one more question...

I'm running this model, and I keep getting this error when I do the Frequency Sweep . 0 to 2000 Hz , 1Hz increment.

Error '' Failed to find a solution for the initial parameter.
Maximum number of Newton iterations reached.
Returned solution is not converged. ''


What is that I'm doing wrong for it to crash this way.
Thank you very much . I have one more question... I'm running this model, and I keep getting this error when I do the Frequency Sweep . 0 to 2000 Hz , 1Hz increment. Error '' Failed to find a solution for the initial parameter. Maximum number of Newton iterations reached. Returned solution is not converged. '' What is that I'm doing wrong for it to crash this way.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content