Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Parametric Sweep

Posted 2013年3月25日 GMT-4 05:47 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.3a 1 Reply

Nithin Kumar Peratla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can I know how to use parametric sweep??
1 Reply Last Post 2013年3月25日 GMT-4 08:16
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月25日 GMT-4 08:16
Hi

it has been discussed a dozen time on the Forum, and it's rather well described in the doc and examples, try a search:

Note that you have 2 types: the continuation type, one model you vary a parameter inside of some physics but your geometry is not changing, and the "external one when you loop around the full geometry and re-meshing as the parameters changes the geometry

There are hence 2 ways to select or add parameter-sweep nodes

--
Good luck
Ivar
Hi it has been discussed a dozen time on the Forum, and it's rather well described in the doc and examples, try a search: Note that you have 2 types: the continuation type, one model you vary a parameter inside of some physics but your geometry is not changing, and the "external one when you loop around the full geometry and re-meshing as the parameters changes the geometry There are hence 2 ways to select or add parameter-sweep nodes -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content