Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
error geometry
Posted 2013年4月9日 GMT-4 14:05 Structural Mechanics Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
what is this error!?
please hepl me
Failed to evaluate variable.
- Variable: mod1.spf.T_stressx
- Geometry: 1
- Boundary: 1645 1646 1647 ... 4656
Failed to evaluate expression.
- Expression: d(((-mod1.spf.T_stressx*test(mod1.u2)-mod1.spf.T_stressy*test(mod1.v2)-mod1.spf.T_stressz*test(mod1.w2))*mod1.solid.surfScale)*(dvol),{test@10})
thanks.
please hepl me
Failed to evaluate variable.
- Variable: mod1.spf.T_stressx
- Geometry: 1
- Boundary: 1645 1646 1647 ... 4656
Failed to evaluate expression.
- Expression: d(((-mod1.spf.T_stressx*test(mod1.u2)-mod1.spf.T_stressy*test(mod1.v2)-mod1.spf.T_stressz*test(mod1.w2))*mod1.solid.surfScale)*(dvol),{test@10})
thanks.
1 Reply Last Post 2013年4月9日 GMT-4 14:27
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
no easy way for us to understand either ;)
Have yo checked domain 1 and the boundaries listed (use the selection view in boundary mode) and checkes where they beong (which are the BC related etc, or are they really meshed ? as you have aready hid boundary ID's you must ave quite a complex model
--
Good luck
Ivar
no easy way for us to understand either ;)
Have yo checked domain 1 and the boundaries listed (use the selection view in boundary mode) and checkes where they beong (which are the BC related etc, or are they really meshed ? as you have aready hid boundary ID's you must ave quite a complex model
--
Good luck
Ivar