Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Single turn boundary domain ACDC module
Posted 2013年4月29日 GMT-4 08:24 2 Replies
Please login with a confirmed email address before reporting spam
Hello
I am trying to simulate magnetic field around a inductor and I am using single turn coil domain. In the start i am trying to simulate some part of inductor not a complete circular coil. I have analysed single_coil_boundary_feed.mph but the issue i am facing is that I can't apply boundary feed and ground at the input and output of current. I see something like this when I open right click single turn to get boundary feed (in the attached image).
I also have attached my build model.
Any suggestions, i have already respected the norms such as surfaces touching the external walls of the air domain surrounding the conductor.
I am trying to simulate magnetic field around a inductor and I am using single turn coil domain. In the start i am trying to simulate some part of inductor not a complete circular coil. I have analysed single_coil_boundary_feed.mph but the issue i am facing is that I can't apply boundary feed and ground at the input and output of current. I see something like this when I open right click single turn to get boundary feed (in the attached image).
I also have attached my build model.
Any suggestions, i have already respected the norms such as surfaces touching the external walls of the air domain surrounding the conductor.
Attachments:
2 Replies Last Post 2013年5月6日 GMT-4 08:08
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
you have defined a node for the single domain, but you have not yet
selected domains for it. If you select domains 2 and 3, then you
can select the faces.
Regards
Jens
you have defined a node for the single domain, but you have not yet
selected domains for it. If you select domains 2 and 3, then you
can select the faces.
Regards
Jens
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
you have defined a node for the single domain, but you have not yet
selected domains for it. If you select domains 2 and 3, then you
can select the faces.
Regards
Jens
Thanks Jens for your help, I didn't knew that I had just this small issue
Regards
Khalid