Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

managing plots

Posted 2013年5月3日 GMT-4 04:32 Results & Visualization Version 4.3a 2 Replies

Ezio
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is there a way to stop refreshing a plot? I mean, if you realize that you're plotting something wrong, can you give some command to stop the plot immediately?

--
Mr. Ezio Cosatto
Ansaldo Energia S.p.A.
PDE/ISV/TMC/TCD
Building 34, 2nd floor, room 22
via N. Lorenzi 8
16152 Genova (ITALY)
Tel.: +39 010 655 3930
email: ezio.cosatto@aen.ansaldo.it ezio.cosatto@physics.org
2 Replies Last Post 2013年5月6日 GMT-4 02:45
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年5月3日 GMT-4 11:10
Hi

check the options preferences, the auto-update plot can be checked on/off somewhere therein ;)

--
Good luck
Ivar
Hi check the options preferences, the auto-update plot can be checked on/off somewhere therein ;) -- Good luck Ivar
Ezio
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年5月6日 GMT-4 02:45
Yes, it's in the "results" item of the options menu.Thank you

--
Mr. Ezio Cosatto
Ansaldo Energia S.p.A.
PDE/ISV/TMC/TCD
Building 34, 2nd floor, room 22
via N. Lorenzi 8
16152 Genova (ITALY)
Tel.: +39 010 655 3930
email: ezio.cosatto@aen.ansaldo.it ezio.cosatto@physics.org
Yes, it's in the "results" item of the options menu.Thank you -- Mr. Ezio Cosatto Ansaldo Energia S.p.A. PDE/ISV/TMC/TCD Building 34, 2nd floor, room 22 via N. Lorenzi 8 16152 Genova (ITALY) Tel.: +39 010 655 3930 email: ezio.cosatto@aen.ansaldo.it ezio.cosatto@physics.org

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content