Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Wedge-on-Mirror !!

Posted 2013年5月8日 GMT-4 08:54 2 Replies

Abeer Al-Ghamdi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,,

How can we design a glass wedge layer tend a 0,5 degree angle from a thin layer in the mirror cylindrical at 3D space ?
2 Replies Last Post 2013年5月9日 GMT-4 19:46
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年5月8日 GMT-4 10:57
Hi

I would propose: draw a 3D cylinder, add a box, rotate it by 0.5° and place it accordingly to overlap part of the cylinder then take the difference cylinder - box you will then have your wedge

--
Good luck
Ivar
Hi I would propose: draw a 3D cylinder, add a box, rotate it by 0.5° and place it accordingly to overlap part of the cylinder then take the difference cylinder - box you will then have your wedge -- Good luck Ivar
Abeer Al-Ghamdi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年5月9日 GMT-4 19:46
Thank you very much,,,
Thank you very much,,,

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content