Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
induction heating
Posted 2025年10月18日 GMT-7 23:52 Electromagnetics, Low-Frequency Electromagnetics, Heat Transfer Version 6.2 1 Reply
Please login with a confirmed email address before reporting spam
Why, during the process of conducting the simulation of workpiece induction heating, as the workpiece moves, the temperature of the induction heating part of the coil keeps rising continuously, and it fails to reach a state where the heat input and output are balanced, thus preventing the temperature at the heating location from remaining constant.The 2-D rotational modeling that I use.Set up heat radiation and heat flux for heat dissipation. Thanks for help!
Please login with a confirmed email address before reporting spam
Check your boundary conditions. Sounds like maybe you are putting heat into your computational space but not necessarily letting any come out. If you have already checked all that, then I suggest you post your .mph file to the forum.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
