Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The construction and materials of geometric layers

Posted 2026年2月5日 GMT+1 12:44 Geometry, Materials 1 Reply

宝永 路
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How can layers be generated in the geometric construction of irregular three-dimensional structures, and how can materials be added more conveniently to different layers

1 Reply Last Post 2026年2月6日 GMT+1 03:23
Robert Koslover Antennas, Waveguides, Electromagnetics
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago 2026年2月6日 GMT+1 03:23

Not sure if this is what you need, but have you tried the "thicken" operation? https://doc.comsol.com/6.4/doc/com.comsol.help.design/design_ug_function.5.48.html Then add/assign material properties as you would to any 3D domain.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Not sure if this is what you need, but have you tried the "thicken" operation? https://doc.comsol.com/6.4/doc/com.comsol.help.design/design_ug_function.5.48.html Then add/assign material properties as you would to any 3D domain.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content

LinkedIn
Instagram
X