Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to apply two phase voltage in an Piezo Divice
Posted 2013年5月16日 GMT-4 15:14 Studies & Solvers Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I modeled a piezo actuator driven by two phase voltage that one is 90-degree behind, that is sin(wt) and cos(wt).
Now I'm doing a frequency domain study,BUT how could I applied the voltage?
I've tried to define v1=50+50i[V] and V2=-50+50i[V] in parameters of global definition, but the results may not be right.
I will be grateful to you sir. Looking forward to your reply.
Thanks.
Hello Emak Wang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.