Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving Mesh ALE - Applied to unconfined groundwater flow with unknown water table

Posted 2013年5月22日 GMT-4 15:54 Fluid & Heat, Mesh, Studies & Solvers Version 4.3a 0 Replies

David Hochstetler
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to set up a model that was presented in the paper presented at the 2012 Conference in Milan: Simulation of Pumping Induced Groundwater Flow in Unconfined Aquifer Using Arbitrary Lagrangian-Eulerian Method (found here: www.comsol.com/offers/conference2012papers/papers/file/id/13355/file/13713_jin_paper.pdf).

I am having trouble selecting the correct boundary conditions for the moving mesh module. I have tried both Prescribed Mesh Displacement and Prescribed Mesh Velocity BCs, but have not been successful. Currently, the top boundary (atmospheric condition: p=0) is not moving appropriately (see the paper). I have scoured the COMSOL site and model library for this example, but have not found anything.

Thanks in advance for any help!

David
0 Replies Last Post 2013年5月22日 GMT-4 15:54
COMSOL Moderator

Hello David Hochstetler

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content