Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to get the dimensions i.e distance between a point and curve...as shown in the attachment...
Posted 2013年6月10日 GMT-4 13:06 Geometry, Materials, Structural Mechanics Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
I need to use material parameter as E= E1* exp(-E2*(d/d0))
where, d is the distance between any point P in the domain from point A on the axis, d0 is the distance of B from point A. One thing is worth noting that A, P and B should be colinear or lie on the same line. The boundary as shown in the figure is obtained by the interpolation method. So, i need to calculate the distance of A from various points (other than what i used to create it) on the interpolation curve .
Earlier, i got the outer points but that is in the post processing part. I need it before calculating the results i.e. before study section as i will be doing optimization by changing the material parameters.
Attachments:
Hello Saurav Kumar
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.