Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Using 3D model data as input for 2D model
Posted 2013年7月9日 GMT-4 16:14 Fluid & Heat, Computational Fluid Dynamics (CFD), Battery Design, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I have a 3D model with coupled flow and electro-chemistry equations. The equations are weakly coupled, so I know from previous experience that I can run the flow and electro-chemistry separately. I usually run the flow model and the I directly use the velocity field as an input for my electro-chemistry equation. This gives me satisfactory results.
From my experiments I know that although, the flow is 3D, the results from electro-chemistry are mostly the same over 90% of my domain. So, I was wondering, if I can run the 3D flow model and use a slice of that model as my flow input for my electro-chemistry equation? How would I mesh the 2D and 3D domains so that I don't lose any relevant information?
Thanks!
Sri.
Hello Sri Puranam
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.