Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
applying reaction force operator on an inner boundary
Posted 2013年8月4日 GMT-4 07:59 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Porous Media Flow, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to calculate normal mass and heat flux on an inner geometry boundary (no boundary condition is applied on the boundary) using the reacf() oprator (reacf(p) for mass and reacf(T) for heat), but I get zero, though It shouldn't be zero. How can I perform an exact integration?
Under the integration settings section, in method-> summation is set of course.
The store reaction forces check box in the output section in the solver’s Settings is checked.
(I'm using version 4.3)
Regards,
Roi
Hello Roi Roded
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.