Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Voronoi 2D network drawing in COMSOL 4.3b

Posted 2013年10月22日 GMT-4 04:57 Interfacing, Geometry Version 4.3b, Version 4.4 6 Replies

Md Saimoom Ferdous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All
I am just wondering whether anyone knows how to draw Voronoi 2D diagram in COMSOL. I also require the division to draw with thickness such that it becomes a boundary instead of line. Any suggestions/help would be appreciated.Thanks.
Saimoom.
6 Replies Last Post 2015年1月13日 GMT-5 10:20
COMSOL Moderator

Hello Md Saimoom Ferdous

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Tushar Gulati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月24日 GMT-4 13:49
Hi Ferdous

Were you able solve your problem?

Regards
Tushar
Hi Ferdous Were you able solve your problem? Regards Tushar
Md Saimoom Ferdous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月24日 GMT-4 14:09
Hi Tushar
Thanks for your response. Unfortunately I am still struggling in finding it. Can you give me some suggestions?
Hi Tushar Thanks for your response. Unfortunately I am still struggling in finding it. Can you give me some suggestions?
Tushar Gulati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月24日 GMT-4 15:17
Hi Ferdous

I just started looking and will let you know if I get any solution. Thank you
Hi Ferdous I just started looking and will let you know if I get any solution. Thank you
Shivaprasad S
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2015年1月4日 GMT-5 02:30
Use Matlab for generating the Voronoi vertices,these vertices will help you to draw the polygon in comsol.
Try using Livelink for Matlab.
Use Matlab for generating the Voronoi vertices,these vertices will help you to draw the polygon in comsol. Try using Livelink for Matlab.
Md Saimoom Ferdous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2015年1月4日 GMT-5 02:35
Thank you very much. I will try to follow your suggestion.
Thank you very much. I will try to follow your suggestion.
Mehdi Amiri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2015年1月13日 GMT-5 10:20
Hi Ferdous,
Have you been able to link Livelink Matlab to COMSOL to import voronoi polygons? I need to do the same. Please let me know if you were able to do so. Thanks,
Mehdi
Hi Ferdous, Have you been able to link Livelink Matlab to COMSOL to import voronoi polygons? I need to do the same. Please let me know if you were able to do so. Thanks, Mehdi

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content