Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
IMPLEMENTING SOLAR SPECTRAL IRRADIANCE DATA (AM 1.5G) ON A 2- D SOLAR CELL
Posted 2013年11月29日 GMT-5 01:50 RF & Microwave Engineering, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2, Version 4.2a, Version 4.3, Version 4.3a, Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
We are trying to simulate a 2-D solar cell using comsol multiphysics 4.3 a. We had succeeded in the initial part. Now we want to incorporate the spectral irradiance (AM 1.5 G SPECTRUM) into my model. We have taken the data from (rredc.nrel.gov/solar/spectra/am1.5/). But the problem is that the unit of spectral irradiance is W/m^2/nm and in the port (input power)only Watt is allowed. I had downloaded the spectral data and used it as an interpolation function.We want to use the AM 1.5G spectral irradiance as a variable in the port input power box.
i am attaching the model and the refractive index table of aluminium.
Please have a look...
Thanks in advance
Looking forward to hearing from you
Regards
Binoy Chacko.
Attachments:
Hello Binoy Chacko
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Were you ever able to find a solution to this problem? Currently running into the same issue.
Thanks,
Sam