Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

About shock tube model

Posted 2010年3月23日 GMT-4 05:11 7 Replies

André Cordeiro
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I have going through the shock tube model: www.comsol.com/showroom/gallery/100/ but I found something strange: should not the pressure wave reach the boundaries (3m tube) in the order of milisenconds? In the results it shows that even after 1 second the wave have not arrive... I am missing something???

Thanks!
7 Replies Last Post 2012年10月1日 GMT-4 04:10
COMSOL Moderator

Hello André Cordeiro

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Fabio Ferrero
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月1日 GMT-5 04:33
You are right. I never thought about that! Probably y is not the real time, but some dimensionless number related to time. Support should helb you with that.

Fabio
You are right. I never thought about that! Probably y is not the real time, but some dimensionless number related to time. Support should helb you with that. Fabio
Pedro Santos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月13日 GMT-5 19:12
Hi!!!
I've been going through that model also and I guess they worked with non-dimensional NS equations, although the dimensions of the geometry are marked as lenght units.
Another curiosity is that the model doesn't seem to handel with greater amplitudes on the step function. In real experiments I believe that the driver zone reaches pressures higher than twice the one of the driven zone (which usually is kept at atmosferic pressure).
Have you tried to contact the Comsol's support??

If you have any information about this model that you could share I would be very appreciated.


Pedro Santos
Hi!!! I've been going through that model also and I guess they worked with non-dimensional NS equations, although the dimensions of the geometry are marked as lenght units. Another curiosity is that the model doesn't seem to handel with greater amplitudes on the step function. In real experiments I believe that the driver zone reaches pressures higher than twice the one of the driven zone (which usually is kept at atmosferic pressure). Have you tried to contact the Comsol's support?? If you have any information about this model that you could share I would be very appreciated. Pedro Santos
Fabio Ferrero
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月14日 GMT-5 04:29
Hi!!!

I tryed to use the model for other gammas (1.1), but I also have divergence problems.

I asked the support for the case of gamma 1.4 with a pressure ratio of 20/1 and they did it for me.
So I think just ask and they will solve it for you.

Bye,
Fabio
Hi!!! I tryed to use the model for other gammas (1.1), but I also have divergence problems. I asked the support for the case of gamma 1.4 with a pressure ratio of 20/1 and they did it for me. So I think just ask and they will solve it for you. Bye, Fabio
Pedro Santos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月14日 GMT-5 05:37
Hi!!

Thanks for the reply. Is to good to know that one can get result for such pressure ratios. I just wonder what were the changes they've made to the model. I've tried many things and nothing worked except for the use of a bigger domain. Could you send me the model file??

Thanks.



Pedro Santos
Hi!! Thanks for the reply. Is to good to know that one can get result for such pressure ratios. I just wonder what were the changes they've made to the model. I've tried many things and nothing worked except for the use of a bigger domain. Could you send me the model file?? Thanks. Pedro Santos
Fabio Ferrero
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月14日 GMT-5 05:50
I will send you a private message with my e-mail address!
Fabio
I will send you a private message with my e-mail address! Fabio
Jian Wu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年9月17日 GMT-4 09:10
Hi!

Have you solved the model with a higher pressure ratio. I met the same problem during my study, which troubled me for several weeks. could you give me some advice?

Thank you very much for the help!

Jian Wu


Hi!!!

I tryed to use the model for other gammas (1.1), but I also have divergence problems.

I asked the support for the case of gamma 1.4 with a pressure ratio of 20/1 and they did it for me.
So I think just ask and they will solve it for you.

Bye,
Fabio


Hi! Have you solved the model with a higher pressure ratio. I met the same problem during my study, which troubled me for several weeks. could you give me some advice? Thank you very much for the help! Jian Wu [QUOTE] Hi!!! I tryed to use the model for other gammas (1.1), but I also have divergence problems. I asked the support for the case of gamma 1.4 with a pressure ratio of 20/1 and they did it for me. So I think just ask and they will solve it for you. Bye, Fabio [/QUOTE]
Fabio Ferrero
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月1日 GMT-4 04:10
As I suggested, ask the support, they did it for me and I think they will do it for you!
Fabio
As I suggested, ask the support, they did it for me and I think they will do it for you! Fabio

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content