Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Waveguide Modeling

Please login with a confirmed email address before reporting spam


Hi,
I am trying to make a simple model where a light source is incident of an input port of a waveguide and then it passes through a different media. I need to see the output power (Intensity) at port 2. I looked at the examples in Comsol but not able to figure out how to implement this. I am giving a simple drawing of what I need to do.
Looking forward for your help.
Thanks in advance
--
Manoj


1 Reply Last Post 2016年10月25日 GMT-4 01:48
COMSOL Moderator

Hello Manoj

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年10月25日 GMT-4 01:48
Hi
I am doing simulation for optical waveguide in which i used three ports , one as input and other two as outputs . In the port setting I choose 1[mW] as input power . Now I need to see how much output power I am getting at both output ports but couldn't be able to do so.
So is it possible to extract the received power at output ports.

Thanks in advance.
Hi I am doing simulation for optical waveguide in which i used three ports , one as input and other two as outputs . In the port setting I choose 1[mW] as input power . Now I need to see how much output power I am getting at both output ports but couldn't be able to do so. So is it possible to extract the received power at output ports. Thanks in advance.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.