Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Vibrations: Eigen Frequency Analysis

Posted 2014年1月16日 GMT-5 15:46 Version 4.3a 2 Replies

Shahid Saghir
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I understand that Eigenvalue=(Eigenfrequency)^2 , where eigenfrequency is is in Rad/second i.e angular velocity. To get cyclic frequency we divide eigenfrequency by 2 PI i.e. f (Hz)= eigenfrequency/2 PI .

Question1: What are the numbers COMSOL gives in Eigen frequency Analysis? are they Eigen values , Eigen Frequencies or cyclic frequency in Hz ?

Question2: How do I get Nondimensional Frequency of a plate using COMSOL?
2 Replies Last Post 2014年1月21日 GMT-5 04:33
RVN
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年1月20日 GMT-5 04:57

Question1: What are the numbers COMSOL gives in Eigen frequency Analysis? are they Eigen values , Eigen Frequencies or cyclic frequency in Hz ?


The Eigenfrequency study solves the eigenvalues for the system and gives the corresponding frequencies as solutions.

Hope this helps
--
/RVN
[QUOTE] Question1: What are the numbers COMSOL gives in Eigen frequency Analysis? are they Eigen values , Eigen Frequencies or cyclic frequency in Hz ? [/QUOTE] The Eigenfrequency study solves the eigenvalues for the system and gives the corresponding frequencies as solutions. Hope this helps -- /RVN
Shahid Saghir
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年1月21日 GMT-5 04:33
ThankS /RVN, Could you please tell me if the frequencies are Rad/Sec or in Hz ?


Thanks
Shahid S
ThankS /RVN, Could you please tell me if the frequencies are Rad/Sec or in Hz ? Thanks Shahid S

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content