Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

frequency domian output in comsol_Structural mechanics module

Posted 2014年1月21日 GMT-5 15:32 Structural Mechanics Version 4.3b 0 Replies

Xiang Yan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

For frequency domain analysis,
COMOL provides displacement and velocity output.
Since we deal with complex domain, u = u*exp(iwt). v=iwu*exp(iwt). They should be both complex.
COMSOL takes the real part of the output results as u=u_amp*cos(2*pi*f*t+u_phase).
My question is how comsol choose the amplitude and phase of the velocity output?
I think the amplitude of the velocity is 2*pi*f*u_amp. However, this value is not equal to the value that comsol outputs.

Thanks,

Shawn
0 Replies Last Post 2014年1月21日 GMT-5 15:32
COMSOL Moderator

Hello Xiang Yan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content