Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electrostatic Spring Softening in MEMS structures [ resonator Beams]

Posted 2014年1月27日 GMT-5 02:44 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers, Structural Mechanics Version 4.3, Version 4.3a, Version 4.3b, Version 4.4 3 Replies

Saurabh Mittal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

While I run "electromechanics" module for a MEMS resonator beam, I select "Prestressed analysis Eigenfrequency". Now my question is whether COMSOL considers the Electrostatic Spring Softening which solving?

Electrostatic Spring Softening is the change in the natural frequency of a MEMS structure due to presence of the Electric field in surrounding the MEMS structure. There is always a reduction in stiffness of the Mems structure which reduces the natural frequency, thus called spring softening.

Is there any option to toggle "Electrostatic Spring Softening" effects so that we can compare the results with and without spring softening?
3 Replies Last Post 2014年2月3日 GMT-5 10:07
Paolo Minotti
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月3日 GMT-5 09:44
If you apply a voltage across the rotor/stator, COMSOL will consider the spring softening.
If you don't apply any voltage, COMSOL won't consider it.
If you apply a voltage across the rotor/stator, COMSOL will consider the spring softening. If you don't apply any voltage, COMSOL won't consider it.
Saurabh Mittal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月3日 GMT-5 09:55
Dear Paolo Minotti

After applying voltage, the deflection takes place and then there is two causes of changes in stiffness:
(1) Due to internal stresses due to deformation
(2) Due to the electrostatic field

Can we switch on and off (2) option?
Can we compare bot h the results?


Dear Paolo Minotti After applying voltage, the deflection takes place and then there is two causes of changes in stiffness: (1) Due to internal stresses due to deformation (2) Due to the electrostatic field Can we switch on and off (2) option? Can we compare bot h the results?
Paolo Minotti
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月3日 GMT-5 10:07
Ok, I don't know if there's any ON/OFF button.

But... maybe you can study your system with Electromechanics (button ON) and then study the same system with Solid Mechanics (button OFF) and then compare your results.
Ok, I don't know if there's any ON/OFF button. But... maybe you can study your system with Electromechanics (button ON) and then study the same system with Solid Mechanics (button OFF) and then compare your results.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content