Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Nonconvergence of time dependent solver using dynamic compression equation
Posted 2014年1月28日 GMT-5 14:12 Mesh, Studies & Solvers Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to implement dynamic compression to a 2D model using triphasic theory of cartilage, but I always get a singularity problem. The nonlinear solver is nonconvergent in the first time step of the time dependent solver. For the steady state case, static compression, I apply a strain_initial = -0.1, and the static case works. The initial value of the time dependent case is the solution of the steady state case. Then I add a strain = -0.025 * sin(2*pi*t*t_const*frequency).
I have tried refining the mesh (quadrilateral and triangular), lower the relative tolerance to 1e-6, and verified steps for the time dependent solver. The frequency is not too high, which is only 2.5%. Boundary conditions may not be complete, or the time-dependent dweak is wrong. Could you please help?
I have tried refining the mesh (quadrilateral and triangular), lower the relative tolerance to 1e-6, and verified steps for the time dependent solver. The frequency is not too high, which is only 2.5%. Boundary conditions may not be complete, or the time-dependent dweak is wrong. Could you please help?
1 Reply Last Post 2014年2月5日 GMT-5 14:53
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I fixed the math equation for the dweak term, and it converges. Now I don't see any change in concentration profile after dynamic compression, as I used the solution of the stationary case as the initial condition of the dynamic case? Why?